Retrieve a saved quote

You May Also Like

Main Content
New Faucet Installation: What You Need to Know | The Allstate Blog

New Faucet? What You Need to Know Before Installation

August 22, 2019 Is your kitchen or bathroom faucet in need of an update? Prepping to replace this type of hardware can get a little tricky if you haven't done your research ahead of time. Watch as home maintenance experts The Handyguys tell you what to look out for when installing a new… Allstate
a person with yellow work gloves installs a new faucet on a bathroom sink.

Is your kitchen or bathroom faucet in need of an update? Prepping to replace this type of hardware can get a little tricky if you haven’t done your research ahead of time. Watch as home maintenance experts The Handyguys tell you what to look out for when installing a new faucet.

Get a quick, personalized insurance quote today.

Select coverage Type

PAUL: Hi, welcome to The Handyguys, and today we’re going talk about a project many homeowners are interested in and that is replacing old faucets.
BRIAN: That’s right. Whether it be your kitchen faucet, Paul, or your bathroom faucet.
BRIAN: We’ll talk about some of the steps some of the considerations and what tools you’ll need to do the project.
PAUL: Alright, so let’s start with the kitchen. In this particular kitchen, I have a very basic faucet here.
PAUL: Would this be something I’d want to consider for this thing?
BRIAN: This is not a good candidate for you, Paul, because notice you have four holes on your sink here.
BRIAN: This is for a three-hole setup.
PAUL: So, there’s three holes underneath this plate and then there’s the extra hole for the soap dispenser.
BRIAN: This one is just a single handle faucet.
BRIAN: Now, you can get this with a sprayer.
BRIAN: You can get it with a soap dispenser.
BRIAN: You can get it with both.
BRIAN: So, you need to consider what you have in place.
PAUL: So, you can buy your faucet kit for your kitchen sink with the proper accessories based on the type of sink you have.
PAUL: So, if it has two accessories then you would get it with you know the soap and the side spray or whatever.
BRIAN: Exactly, but some of these have sprayers built-in.
BRIAN: If you have an extra hole, they have little filler pieces you can put in but that doesn’t necessarily look the best.
BRIAN: And, you can also drill new holes if you’re adding a feature or an accessory but that can be a little complicated sometimes.
PAUL: It won’t work for certain sinks but the main thing you want to consider though when you’re going to replace this is to be sure that you have a shutoff valve under the sink for the water.
BRIAN: The shutoff valve is critical.
BRIAN: If you don’t have a shutoff valve at all under your sink, it’s probably not a do-it-yourself project.
BRIAN: You’re going to need a plumber to come in and install one of those for you.
BRIAN: You may also want to know where your main shutoff valve is sometimes you’ll have a little drip and you might want to turn that off as an extra precaution.
PAUL: You know the other thing to consider is what size hoses do you need.
PAUL: So, these usually come with some pipe or hose some have full length hoses already connected.
PAUL: This doesn’t.
PAUL: So, I’m going to need to attach a hose and typically it’s a half-inch connection on one side and on your supply side 3/8 inches.
BRIAN: Right into the shutoff valve.
PAUL: But, if it’s not then you’re going to have to run to the hardware store to get the proper hose.
BRIAN: And, you’re going to want to measure this before you go.
BRIAN: But, pro tip here, do this project when the hardware store is open.
BRIAN: Inevitably, you’ve got the wrong size hose or a different fitting.
BRIAN: You’ve left something out and you need to run to the store.
BRIAN: Happens to me every time it seems.
PAUL: So, what about when we look at vanities or pedestal sinks for your bathrooms.
PAUL: What kind of faucets are those?
BRIAN: For those, a very typical would be something with a four-inch spread either a single handle or a dual handle like that.
PAUL: So, this is called a narrow set?
BRIAN: A narrow set.
BRIAN: Or, a four-inch set.
BRIAN: You may also have a wide set, Paul, where you have the holes that are offset.
BRIAN: Maybe eight inches, maybe 10 inches or some other arbitrary number in between.
BRIAN: You’ll have the hot and cold separate from the filler spout.
PAUL: Right. So, when you purchase these you get it as a wide set or as a narrow set and they come like this.
PAUL: They have the hose connections.
PAUL: You know right built into them so you’re ready to go.
BRIAN: And, you may also end up replacing your drain to match your faucet.
PAUL: So, this drain here is a brass color to match a brass-colored faucet and that comes with the product.
BRIAN: Exactly.
PAUL: So, you got exact matching hardware.
BRIAN: Exactly.
PAUL: OK, so that makes a lot of sense, and again, you need to make sure you have the shutoff valve whether it be in your bathroom or your powder room or what have you.
PAUL: OK, so Brian, what do we need to consider as far as tools for this project?
BRIAN: Well, you’re going to need wrenches.
PAUL: Yeah, so I have an adjustable wrench here.
BRIAN: You’re probably going to need something like that.
PAUL: A basin wrench.
BRIAN: You may need a basin wrench for under the sink.
PAUL: What are these?
BRIAN: These are slip joint pliers.
BRIAN: These are good for drain connections also for supply line connections. They’re adjustable to different sizes.
PAUL: Obviously, screwdrivers.
BRIAN: You might need those.
PAUL: You want a flashlight.
BRIAN: You need to have good lighting wherever you’re doing this project
PAUL: And, plumber’s putty.
BRIAN: You may need plumber’s putty.
BRIAN: Follow the directions that come with the faucet.
BRIAN: It’ll tell you exactly where to put this.
BRIAN: It may have gaskets instead you may also need something called, Teflon Tape, but again, follow the instructions use Teflon Tape where it’s called for in the instructions. Don’t put it anywhere else.
PAUL: And, what about this fancy tool?
BRIAN: This is a faucet wrench. This is a newfangled faucet wrench.
BRIAN: The old ones used to have a little spring-loaded thing and there’s different settings or different configurations of this depending on your faucet.
BRIAN: It can connect up to make that easier to work in a tight spot under a sink.
PAUL: So, there you have it.
PAUL: So, most of the tools are fairly basic. There are some specific tools for plumbing.
PAUL: Again, access to the hardware store is helpful.
PAUL: And, you can get the job done.
PAUL: So, it’s not, it’s a job that a lot of homeowners can accomplish.
BRIAN: Absolutely.
PAUL: Maybe in an hour or two.
BRIAN: Absolutely.
PAUL: Alright. So, there you have it and thanks for watching The Handyguys.
BRIAN: Thanks.

Sign up for our email newsletter.

Get more tips and tricks like this delivered straight to your inbox each month when you sign up for our newsletter.
You May Also Like

Agents Are Nearby, Ready To Help

Your location is set for: Loading...