Retrieve a saved quote

You May Also Like

Main Content
Major Motorcycle Advancements | The Allstate Blog

Over 100 Years of Motorcycle Advancements

September 18, 2019 For many motorcycle riders, the classic bikes will always be the best — there’s even a Motorcycle Hall of Fame in Pickerington, Ohio, celebrating some of history’s most iconic motorcycles. But innovation in motorcycle design has not stood still, and today's motorcycles consistently deploy improvements in technology and performance. Here's a brief look back at some… Allstate
line of older motorcycles.

For many motorcycle riders, the classic bikes will always be the best — there’s even a Motorcycle Hall of Fame in Pickerington, Ohio, celebrating some of history’s most iconic motorcycles. But innovation in motorcycle design has not stood still, and today’s motorcycles consistently deploy improvements in technology and performance. Here’s a brief look back at some of the major advancements of the past 100-plus years, and a glimpse of what might be coming next.

Get a quick, personalized insurance quote today.

Select coverage Type

Past Advancements (1916 through 1980s)

While motorcycles of various types have been around since the late 1800s, many of the important safety and performance features were added within the past 100-plus years. The turn of the century saw changes that helped make roads safer — William Phelps Eno created the first city traffic code in 1903, according to the Institute of Transportation Engineers, and lane markings first appeared on roads in 1911, says the Michigan Department of Transportation. The 20th century also brought some important advancements in motorcycle safety and technology.


In the early 1900s, motorcycles had brakes on the rear wheel only. In the mid- to late 1920s, as motorcycles got faster and more powerful, additional stopping power became more of a priority. According to the National Highway Transport Safety Association (NHTSA), Harley-Davidson was the first motorcycle manufacturer to add front-wheel brakes in 1928.

Standardized Controls

Before 1972, there were no federally mandated standards for motorcycle controls, according to the NHTSA. Manufacturers designed motorcycles with the clutch, brakes, turn signals and other controls that could be positioned in various places. Since 1972, federal regulations have determined where motorcycle controls must be placed, helping to make it easier and safer for riders to switch from one motorcycle to another.

Fuel Injection Systems

American cars began to feature fuel injection systems in the 1950s, according to the Petersen Automotive Museum. It took much longer for electronic fuel injection technology to be deployed in motorcycles, which continued to rely on traditional carburetors. In the early 1980s, the prospect of tighter emissions regulations from the Environmental Protection Agency caused motorcycle manufacturers to turn to fuel injection systems, which use sensors to help ensure fuel is burned more efficiently, according to

Antilock Braking Systems (ABS)

The NHTSA explains that Antilock Braking Systems (ABS) automatically control brakes to help prevent the wheels from locking up during sudden braking. says that ABS technology was applied to bikes in the late 1980s — not long after it was developed in cars. A more recent development in motorcycle technology is “cornering ABS,” a type of ABS that BMW made available on production bikes in 2014 that helps prevent wheels from locking even when brakes are applied quickly during turns on corners, says Motorbike Writer.

Recent Advancements (1990s to Today)

Dual-Compound Tires

Motorcycle tires can wear unevenly, according to Rider Magazine. Because most bikes spend more time traveling straight, the center of the tire typically wears faster than the shoulders. Harder tires generally last longer, but may not give as good a grip when turning.

Developed in 1994 by Michelin for use on its racing motorcycles, dual-compound tires combine harder rubber in the center of the tire, improving durability and tire life, with softer rubber on the shoulders that typically grips better on corners, according to Ultimate Motorcycling.


The introduction of airbags to cars was a major safety advancement. However, creating an airbag for a motorcycle presents some obvious challenges. Motorbike Writer explains motorcycle airbags are being developed, but the technology hasn’t spread widely. Motorcycle and safety equipment manufacturers are working on vests, worn by the rider, that use sensors to deploy a wearable personal airbag in the event of a collision. Airbags are now used by professional motorcycle racers, says, but these technologies have not yet been widely adopted by your average motorcyclist.

Traction Control

Traction control is another relatively recent safety innovation for motorcycles, which can provide some additional protection against skidding. Using the sensors in a motorcycle’s ABS, a motorcycle’s traction control measures the speed at which the two wheels are spinning, says If the two wheels are running at significantly different speeds, traction control reduces power to the rear wheel (which is most likely to lose traction because it’s powered by the engine), helping to improve stability for the rider.

Dynamic Brake Lights

Dynamic brake lights are meant to help indicate how hard a motorcycle is braking by utilizing a two-stage brake light system, according to Motorcyclist. In many dynamic brake light systems, one set of lights is engaged during ordinary braking, while another set is turned on when the bike gets closer to a standstill or the rider suddenly brakes hard. This provides an additional warning to trailing vehicles that the motorcycle is decelerating very quickly and/or coming to a complete stop.

The Future

Hubless Wheels

Missing the spokes we normally associate with motorcycle wheels, hubless wheels look futuristic. Jalopnik explains that instead of spokes, hubless wheels have a rigid inner ring attached to the rotating part of the wheel. It’s not all for show, either — the advantages of hubless wheels include reduced stress on the motorcycle’s structure, improved steering accuracy and less vibration, so they may catch on more widely, according to Jalopnik.

Hybrid and Electric Bikes

As eco-friendly cars become increasingly common, Digital Trends notes that while only a number of electric motorcycles are available at this time, several major manufacturers are working on designing electric bikes. Hybrid Bikes, which combine the use of a combustion engine and an electric motor, are also in the development, notes Cycle World. While there are some of these eco-friendly motorcycles available currently, it’s only a matter of time before hybrid and electric models become more common.

The bottom line is that motorcycles are constantly evolving, just as they have for the past century. New technologies and creative engineering have helped improve both the safety and performance of motorcycles, and will continue to do so in the future. It will be exciting to see what the next big thing may be.

Originally published on May 3, 2016.

Sign up for our email newsletter.

Get more tips and tricks like this delivered straight to your inbox each month when you sign up for our newsletter.
You May Also Like

Agents Are Nearby, Ready To Help

Your location is set for: Loading...